Toyota Yaris: Lighting (int) / Lighting System
ComponentsCOMPONENTS ILLUSTRATION
*1 FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY - -
N*m (kgf*cm, ft.*lbf): Specified torque - - RemovalREMOVAL CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH side and LH side...
PARTS LOCATION ILLUSTRATION
*A w/ Ambient Illumination Light - - *1 FRONT DOOR AMBIENT ILLUMINATION LIGHT LH (FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH) *2 FRONT DOOR AMBIENT ILLUMINATION LIGHT RH (FRONT DOOR TRIM BOARD SUB-ASSEMBLY RH) *3 MAP LIGHT ASSEMBLY *4 ROOM LIGHT ASSEMBLY *5 NO...
Other information:
REASSEMBLY CAUTION / NOTICE / HINT HINT:
Use the same procedure for the LH side and RH side.
The following procedure is for the LH side.
PROCEDURE 1. INSTALL HOLE PLUG (a) Install the 2 hole plugs.
2. INSTALL HOLE PLUG (a) Install the 3 hole plugs...
DESCRIPTION These DTCs are stored when there is a CAN communication malfunction between the certification ECU (smart key ECU assembly) and ECM, main body ECU (multiplex network body ECU) or combination meter assembly. DTC No. Detection Item DTC Detection Condition Trouble Area Note U010087 Lost Communication with ECM/PCM "A" Missing Message CAN communication malfunction between certification ECU (smart key ECU assembly) and ECM (1-trip detection logic*) ECM
Turn the ignition switch to ON and wait at least 10 seconds...
Categories
The fuel gauge shows approximately how much fuel is remaining in
the tank when the ignition is switched ON. We recommend keeping
the tank over 1/4 full.

Full
1/4 Full
Empty
read more