Toyota Yaris: Lighting System / Data List / Active Test

Toyota Yaris XP210 (2020-2024) Reapir and Service Manual / Vehicle Interior / Lighting (int) / Lighting System / Data List / Active Test

DATA LIST / ACTIVE TEST

DATA LIST

NOTICE:

In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

HINT:

Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

(a) Read the Data List according to the display on the GTS.

Body Electrical > Main Body > Data List

Tester Display	Measurement Item	Range	Normal Condition	Diagnostic Note
FR Door Lock Position Switch Status	Front door RH unlock detection switch signal	LOCK or UNLOCK	LOCK: Front door RH locked UNLOCK: Front door RH unlocked	-
FL Door Lock Position Switch Status	Front door LH unlock detection switch signal	LOCK or UNLOCK	LOCK: Front door LH locked UNLOCK: Front door LH unlocked	-
RR Door Lock Position Switch Status	Rear door RH unlock detection switch signal	LOCK or UNLOCK	LOCK: Rear door RH locked UNLOCK: Rear door RH unlocked	*1
RL Door Lock Position Switch Status	Rear door LH unlock detection switch signal	LOCK or UNLOCK	LOCK: Rear door LH locked UNLOCK: Rear door LH unlocked	*1
Back Door Lock Position Status	Back door courtesy switch signal	LOCK or UNLOCK	LOCK: Back door locked UNLOCK: Back door unlocked
FR Door Courtesy Switch Status	Front door courtesy light switch assembly (RH) signal	CLOSE or OPEN	CLOSE: Front door RH closed OPEN: Front door RH open	-
FL Door Courtesy Switch Status	Front door courtesy light switch assembly (LH) signal	CLOSE or OPEN	CLOSE: Front door LH closed OPEN: Front door LH open	-
RR Door Courtesy Switch Status	Rear door courtesy light switch assembly (RH) signal	CLOSE or OPEN	CLOSE: Rear door RH closed OPEN: Rear door RH open	*1
RL Door Courtesy Switch Status	Rear door courtesy light switch assembly (LH) signal	CLOSE or OPEN	CLOSE: Rear door LH closed OPEN: Rear door LH open	*1
Back Door Courtesy Switch Status	Back door courtesy switch signal	CLOSE or OPEN	CLOSE: Back door closed OPEN: Back door open	-
IGR Power	Ignition switch ON signal	OFF or ON	OFF: Ignition switch off ON: Ignition switch ON	-

*1: Although the item is displayed on the GTS, it is not applicable to this vehicle.

Body Electrical > Power Distribution Box > Data List

Tester Display	Measurement Item	Range	Normal Condition	Diagnostic Note
Panel Light Input Signal	Panel light input condition	OFF or ON	OFF: Light control switch not in tail position ON: Light control switch in tail position	-
Panel Light Output Signal	Panel light output condition	OFF or ON	OFF: Light control switch not in tail or head position ON: Light control switch in tail or head position	-
Panel Light Output Current	Panel light current	Min.: 0, Max.: 255 A	Below 3.2 A	Panel light current when output is on
Panel Light Fuse Shut Off Status	Panel Light Fuse condition	OFF or ON	OFF: Fuse not shut off ON: Fuse shut off	-
Panel Light Fuse Shut Off Count	Panel light fuse shut off history	Min.: 0, Max.: 255	Number of fuse shut off displayed	-

ACTIVE TEST

HINT:

Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

(a) Perform the Active Test according to the display on the GTS.

Body Electrical > Main Body > Active Test

Tester Display	Measurement Item	Control Range	Diagnostic Note
Illuminated Entry System	Turns on the lights that are controlled by the illuminated entry system*1	OFF or ON	Perform the Active Test with DOOR switch in the map light assembly and room light assembly turned on.
Front Footwell Lights	Operation of the following lights: Front door ambient illumination light (front door trim board sub-assembly) Under Cover Light (No. 1 Interior Illumination Light Assembly (for RH Side) and No. 1 Interior Illumination Light Assembly (for LH Side)) No. 1 interior illumination light assembly (center tray illumination)	OFF or ON	*2
Relay for Interior Light Auto Cut Function	DOME CUT relay	OFF or ON	When performing this Active Test, turn all the interior lights on. OFF: DOME CUT relay on (interior lights turn on) ON: DOME CUT relay off (interior lights turn off)

*1: Refer to System Description for the lights that are controlled by the illuminated entry system.
Click here
*2: w/ Ambient Illumination Light

Body Electrical > Entry&Start > Active Test

Tester Display	Measurement Item	Control Range	Diagnostic Note
Start SW Light Power Supply	Engine switch illumination	OFF or ON	-

Diagnosis System

DIAGNOSIS SYSTEM DESCRIPTION (a) Lighting system data and Diagnostic Trouble Codes (DTCs) can be read from the Data Link Connector 3 (DLC3) of the vehicle...

IG Signal Circuit

DESCRIPTION This circuit detects the ignition switch ON or off condition, and sends it to the main body ECU (multiplex network body ECU). WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Inspect the fuses for circuits related to this system before performing the following procedure...

Other information:

Toyota Yaris XP210 (2020-2024) Reapir and Service Manual: Dtc Check / Clear

DTC CHECK / CLEAR DTC CHECK (a) Check for DTC(s). Chassis > Four Wheel Drive > Trouble Codes (b) Check the details of the DTCs. NOTICE: Make sure to clear the DTCs after repair. Display Item Description Test Failed Shows the malfunction judgment results during the current trip...

Toyota Yaris XP210 (2020-2024) Reapir and Service Manual: System Description

SYSTEM DESCRIPTION FRONT WIPER CONTROL FUNCTION Control/Function Description MIST function Operates the front wipers in LO when the front wiper switch is held in the MIST position. Auto operation Operates the wipers as requested by the rain sensor when the front wiper switch is in the AUTO position...