Toyota Yaris: Switches and Controls / Fog Lights
Use this switch to turn on the fog lights. The fog lights will
improve visibility at night and during foggy conditions.
The fog lights can be used when the ignition is switched ON.

The fog lights turn on when the
fog light switch is turned to the
position and turn off when the
switch is turned to the OFF position.
The fog lights turn on when the
headlights are turned on. They will
not turn on if the headlight switch is
in the
position or OFF position.
- The fog lights will turn off when the headlights are set at high beams.
- With auto-light control: If the fog light switch is in the position and
the headlight switch is in the
AUTO position, the fog lights will turn on when the headlights, the exterior
lights and dashboard illumination turn on.
Some countries require moving vehicles to have their lights on (daytime
running lights) during the daytime.
The daytime running lights turn on automatically when the vehicle
starts moving...
Other information:
DESCRIPTION Detection Item Symptom Trouble Area Front Camera Module Communication Stop Mode Communication stop for "Front Camera Module" is indicated on the "Communication Bus Check" screen of the GTS. Click here
Forward recognition camera branch line or connector
Power source circuit of forward recognition camera
Forward recognition camera ground circuit
Forward recognition camera
WIRING DIAGRAM
CAUTION / NOTICE / HINT CAUTION: When performing the confirmation driving pattern, obey all speed limits and traffic laws...
OPERATION CHECK CHECK FRONT SEAT HEATER (a) for LH Side: (1) Turn the ignition switch to ON. (2) Set the seat heater switch LH to "HI" or "LO" and check that the seat heater operates. OK: Seat cushion side and seatback side operate together (3) Operate the seat heater switch LH to switch the seat heater to "HI" or "LO" and check that the heater level indicator illuminates or turns off...
Categories
Stop the vehicle completely.
Manual transaxle:
Shift into neutral and set the parking brake.
Automatic transaxle:
Shift the selector lever to the P position and set the parking brake.
Press the push button start to turn off the engine. The ignition position is
off.
read more