Toyota Yaris: Bluetooth® Hands-Free / Communication Settings

Toyota Yaris XP210 (2020-2025) Owner's Manual / Interior Features / Bluetooth® / Bluetooth® Hands-Free / Communication Settings

Select the Toyota Yaris. Communication Settings icon on the home screen and display the Communication screen. Select to change the setting.

Toyota Yaris. Communication Settings

* 1: Depending on the device, it may be necessary to acquire download permission on the device side.

Receiving and Replying to Messages (available only with E-mail/SMS compatible phones)

SMS (Short Message Service) messages, and E-mail received by connected devices can be downloaded, displayed, and played (read by the system). Additionally, replies can also be made to calls and messages in the received messages...

Bluetooth® Audio

Applicable Bluetooth® specification (Recommended)Ver. 1.1/1.2/2.0 + EDR/2.1 + EDR/3.0 (conformity) Response profile A2DP (Advanced Audio Distribution Profile) Ver...

Other information:

Toyota Yaris XP210 (2020-2025) Reapir and Service Manual: Certification Ecu

ComponentsCOMPONENTS ILLUSTRATION *1 CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) - - RemovalREMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the certification ECU (smart key ECU assembly) removal/installation are shown below...

Toyota Yaris XP210 (2020-2025) Reapir and Service Manual: Replacement

REPLACEMENT PROCEDURE 1. REPLACE INTAKE VALVE GUIDE BUSH (a) Heat the cylinder head sub-assembly to between 80 and 100°C (176 to 212°F). (b) Place the cylinder head sub-assembly on wooden blocks. CAUTION: Be sure to wear protective gloves. (c) Using SST and a hammer, tap out the intake valve guide bush...