Toyota Yaris: Mirrors / Rearview Mirror

Toyota Yaris XP210 (2020-2025) Owner's Manual / Before Driving / Mirrors / Rearview Mirror

Rearview mirror adjustment

Before driving, adjust the rearview mirror to center on the scene through the rear window.

Toyota Yaris. Rearview Mirror

Reducing glare from headlights

Adjust the mirror with the day/night lever in the day position.

Push the day/night lever forward for day driving. Pull it back to reduce glare of headlights from vehicles at the rear.

Toyota Yaris. Rearview Mirror

Day
Night

WARNING

Do not stack cargo or objects higher than the seatbacks

Cargo stacked higher than the seatbacks is dangerous. It can block your view in the rearview mirror, which might cause you to hit another car when changing lanes.

Caution while driving

Do not adjust the position of the mirror while driving. Doing so may lead to mishandling of the vehicle and cause an accident, resulting in death or serious injury.

Outside Mirrors

Mirror type Flat type (driver’s side) Flat surface mirror. Convex type (front passenger side) The mirror has single curvature on its surface. Power mirror adjustment The ignition must be switched to ACC or ON position...

Windows

The windows can be opened/closed by operating the power window switches. When driving with only one of the rear windows open, your ears might experience a resonating sound...

Other information:

Toyota Yaris XP210 (2020-2025) Reapir and Service Manual: Installation

INSTALLATION CAUTION / NOTICE / HINT NOTICE: This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts. Click here PROCEDURE 1. INSTALL FUEL INJECTOR SEAL (a) Apply engine conditioner to the area shown in the illustration...

Toyota Yaris XP210 (2020-2025) Reapir and Service Manual: How To Use This Manual

General InformationGENERAL INFORMATION GENERAL DESCRIPTION (a) This manual is written in accordance with SAE J2008. (b) Repair operations can be separated mainly into the following 3 processes: (1) Diagnosis (2) Removing/Installing, Replacing, Disassembling/Reassembling, Checking and Adjusting (3) Final Inspection (c) The following procedures are omitted from this manual...