Toyota Yaris: Operating Tips for Audio System / Operating Tips for Android™

Toyota Yaris XP210 (2020-2025) Owner's Manual / Interior Features / Audio System / Operating Tips for Audio System / Operating Tips for Android™

Requires the Android Auto app on Google Play and an Android compatible smartphone running Android™ 5.0 Lollipop or higher.

Google, Android, Android Auto and other related marks are trademarks of Google LLC.

To prevent loss or damage of stored data, we recommend that you always back up your data.

NOTICE

For the purposes of safety, do not operate your Android™ Smartphone while driving.
Disconnect the Android™ Smartphone when it is not in use. If the device is left in the cabin, it could be damaged or the battery may weaken due to the excessive temperature or humidity inside the cabin.
If the Android™ Smartphone battery has deteriorated, it may not recharge or play audio even if it is connected to this unit.
Before use, carefully read the user instructions for the Android™ Smartphone.

Agreements and disclaimers related to Apple CarPlay™

This unit is compatible with Apple CarPlay™ which can operate an iPhone® using the vehicle’s audio device. iPhone, Siri and Apple Music are registered trademarks of Apple Inc...

Audio Set

Audio Set has 3 different human interfaces. Commander switch Touch panel Voice recognition with steering switch and microphone The explanation of functions described in this manual may differ from the actual operation, and the shapes of screens and buttons and the letters and characters displayed may also differ from the actual appearance...

Other information:

Toyota Yaris XP210 (2020-2025) Reapir and Service Manual: Reassembly

REASSEMBLY PROCEDURE 1. INSTALL NEEDLE ROLLER BEARING (a) Coat the needle roller bearing with gear oil and install it to the No. 2 output shaft. 2. INSTALL REVERSE DRIVEN GEAR (a) Coat the reverse driven gear with gear oil and install it to the No...

Toyota Yaris XP210 (2020-2025) Reapir and Service Manual: Calibration

CALIBRATION DESCRIPTION (a) Refer to the table below and then perform the necessary operation according to the part to be replaced in order to perform calibration. Parts to be Replaced / Operation Necessary Operation Skid control ECU (brake actuator assembly) Calibration Yaw rate and acceleration sensor (airbag sensor assembly) Calibration Wheel alignment adjustment Calibration UTILITY ITEMS Utility Items Main Purpose Link All Readiness Confirm if DTC judgment has been completed...