DATA LIST / ACTIVE TEST
DATA LIST
NOTICE:
In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
HINT:
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
(a) Read the Data List according to the display on the GTS.
Body Electrical > Power Distribution Box > Data List Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
---|---|---|---|---|
Passenger Seat Buckle Switch Status | Front passenger side seat belt buckle switch status | Set, Unset or Unknown | Set: Front passenger side seat belt fastened Unset: Front passenger side seat belt not fastened Unknown: Data is not determined | - |
Passenger Seat Occupant Sensor Status | Passenger seat occupant detection sensor status | OFF, ON or Unknown | OFF: Front passenger seat not occupied ON: Front passenger seat occupied Unknown: Data is not determined | - |
Rear Seat RH Buckle Switch Status | Rear RH seat belt buckle switch status | Set, Unset or Unknown | Set: Rear RH seat belt fastened Unset: Rear RH seat belt not fastened Unknown: Data is not determined | - |
Rear Seat LH Buckle Switch Status | Rear LH seat belt buckle switch status | Set, Unset or Unknown | Set: Rear LH seat belt fastened Unset: Rear LH seat belt not fastened Unknown: Data is not determined | - |
Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
---|---|---|---|---|
Driver Buckle Switch | Driver side seat belt buckle switch status | Fastened or Not Fastened | Fastened: Driver side seat belt fastened Not Fastened: Driver side seat belt not fastened | - |
Driver Seatbelt Warning Buzzer Function | Driver side seat belt warning buzzer setting status | ON or OFF | Customize setting displayed | - |
Passenger Seatbelt Warning Buzzer Function | Passenger side seat belt warning buzzer setting status | ON or OFF | Customize setting displayed | - |
Rear Right Seatbelt Warning Buzzer Function | Rear RH seat belt warning buzzer setting status | ON or OFF | Customize setting displayed | - |
Rear Left Seatbelt Warning Buzzer Function | Rear LH seat belt warning buzzer setting status | ON or OFF | Customize setting displayed | - |
ACTIVE TEST
HINT:
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
(a) Perform the Active Test according to the display on the GTS.
Body Electrical > Combination Meter > Active Test Tester Display | Measurement Item | Control Range | Diagnostic Note |
---|---|---|---|
Driver Side Seat Belt Warning | Front seat belt warning light | ON or OFF | - |
The front and side supplemental restraint systems (SRS) include different types of air bags. Please verify the different types of air bags which are equipped on your vehicle by locating the “SRS AIRBAG” location indicators. These indicators are visible in the area where the air bags are installed.
The air bags are installed in the following locations:
The steering wheel hub (driver air bag) The front passenger dashboard (front passenger air bag) The outboard sides of the front seatbacks (side air bags) The front and rear window pillars, and the roof edge along both sides (curtain air bags)