Toyota Yaris: Seat Belt / Fastening the Seat Belt
Position the lap belt as low as
possible, not on the abdominal
area, then adjust the shoulder belt
so that it fits snugly against your
body.
4-Door
Before fastening the rear seat
belt, make sure that the seat belt
passes through the seat belt
guide correctly and it is not
twisted.
Depress the button on the seat
belt buckle. If the belt does not
fully retract, pull it out and check
for kinks or twists. Then make
sure it remains untwisted as it
retracts...
Other information:
INSTALLATION PROCEDURE 1. INSTALL WINDSHIELD WIPER RELAY ASSEMBLY (a) Engage the guides to install the windshield wiper relay assembly.
(b) Install the bolt. Torque: 10 N·m {102 kgf·cm, 7 ft·lbf} (c) Connect the 2 connectors. 2. INSTALL POWER DISTRIBUTION BOX ASSEMBLY WITH MULTIPLEX NETWORK BODY ECU Click here
3...
DESCRIPTION The SRS warning light is located in the combination meter assembly. When the SRS is normal, the SRS warning light comes on for approximately 6 seconds after the ignition switch is turned from off to ON, and then turns off automatically. If there is a malfunction in the SRS, the SRS warning light comes on to inform the driver of a problem...
Categories
If a key is left in the vehicle, the functions of the key left in the vehicle
are temporarily suspended to prevent theft of the vehicle.
To restore the functions, press the unlock button on the functions-suspended
key in the vehicle.
read more