DATA LIST / ACTIVE TEST
DATA LIST
HINT:
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
(a) According to the display on the GTS, read the Data List.
Body Electrical > Main Body > Data List Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
---|---|---|---|---|
Total Distance Traveled | - | - | - | Not applicable |
Total Distance Traveled - Unit | - | - | - | Not applicable |
FR Door Lock Position Switch Status | Front door RH unlock detection switch | Lock or Unlock | Lock: Front door RH locked Unlock: Front door RH unlocked | - |
FL Door Lock Position Switch Status | Front door LH unlock detection switch | Lock or Unlock | Lock: Front door LH locked Unlock: Front door LH unlocked | - |
Back Door Lock Position Status | Back door unlock detection switch | Lock or Unlock | Lock: Back door locked Unlock: Back door unlocked | - |
FR Door Courtesy Switch Status | Front door courtesy light switch RH | Close or Open | Close: Front door RH closed Open: Front door RH open | - |
FL Door Courtesy Switch Status | Front door courtesy light switch LH | Close or Open | Close: Front door LH closed Open: Front door LH open | - |
Back Door Courtesy Switch Status | Back door courtesy light switch | Close or Open | Close: Back door closed Open: Back door open | - |
Hood Courtesy Switch Status | Engine hood courtesy switch | Close or Open | Close: Engine hood closed Open: Engine hood open | - |
IGR Power | IGR Signal | OFF or ON | OFF: Ignition switch off ON: Ignition switch ON | - |
Security Control with Mechanism Key Function | Setting of customize setting "Security control with mechanism key function" | Disable or Enable | Customize setting displayed | - |
ACTIVE TEST
HINT:
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. The Data List information can be displayed while performing Active Tests.
(a) According to the display on the GTS, perform the Active Test.
Body Electrical > Main Body > Active Test Tester Display | Measurement Item | Control Range | Diagnostic Note |
---|---|---|---|
Vehicle Horn | Vehicle horn | OFF or ON | - |
Security Horn | Security horn assembly | OFF or ON | - |
Tester Display | Measurement Item | Control Range | Diagnostic Note |
---|---|---|---|
Immobiliser Indicator | Security indicator | OFF or ON | - |
WARNING
When removing the fuel-filler cap, loosen the cap slightly and wait for any hissing to stop, then remove it
Fuel spray is dangerous. Fuel can burn skin and eyes and cause illness if ingested. Fuel spray is released when there is pressure in the fuel tank and the fuel-filler cap is removed too quickly.