Toyota Yaris: Cruise Control / Cruise Main Indication (White), Cruise Set Indication (White)/Indicator
Light (Green)
Cruise main indication (white)
The cruise main indication
(white) is displayed in the
instrument cluster when the
cruise control system is activated.
Cruise set indication (white)/indicator light (green)
The cruise set indication (white)
is displayed in the instrument
cluster and the cruise set indicator light (green) turns on
when a cruising speed has
been set.
To activate the system, press the ON switch. The cruise main indication (white)
is displayed.
To deactivate the system, press the OFF/CAN switch.
The cruise main indication (white) turns off...
Other information:
DESCRIPTION This DTC is stored when the skid control ECU (brake actuator assembly) receives a power supply malfunction signal from the steering sensor. DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from C14FE14 Steering Angle Sensor Supply Voltage Circuit Circuit Short to Ground or Open When the +BS terminal voltage is from 9...
DESCRIPTION When a malfunction has occurred in the power source circuit, the AWD ECU assembly stores DTC C123A1C. DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Memory C123A1C Supply Voltage Circuit Circuit Voltage Out of Range
At a vehicle speed of 3 km/h (2 mph) or more, the IG1 terminal voltage is less than 9...
Categories
The front seat belt pretensioners are designed to deploy in moderate or
severe frontal, near frontal collisions.
In addition, the pretensioners operate when a side collision or a rollover
accident is detected. The pretensioners operate differently
depending on what types of air bags are equipped. For more details
about the seat belt pretensioner operation, refer to the SRS Air Bag
Deployment Criteria.
read more